W-41 Yellow Wax

INTRODUCTION & FEATURES

Instruction

APPLICATIONSurface should be free of all oxidation and contamination. For best results, preclean the surface with P-40 Duz-All® or P-26 Clear Cut™ to remove contaminants and condition paint before applying. Two or more thin coats will give better results than one heavy application. Hand Use: Using a damp (not wet) wax applicator or sponge, place into Yellow Wax™ can and spin to collect wax on applicator. Apply thin coats of Yellow Wax™ and spread evenly over a small area on surface, rubbing in well with a circular motion. Let dry (3-5 minutes) to a haze then wipe off with a clean, soft, terry cloth. Polish by hand to ahigh gloss finish, turning cloth while wiping down.Orbital Buffer/DA: Apply Yellow Wax™ to wax applicator and spread onto surface. Using a clean, damp (not wet) bonnet, turn on orbital and buff product evenly over surface. Let dry (3-5 minutes) to a haze then use a second clean bonnet to remove the product.SPECIAL NOTESTo minimize possibility of streaking, do not apply in direct sunlight or onto a hot surface. Keep from freezing. Keep container closed when not in use.

Viewed products

You have not viewed any product yet!