Feature

SUITABLE SUBSTRATESOlefin-based plasticsAluminumSteelGlassChromePreviously painted surfaces

XXX Adhesion Promoter

Price: Liên hệ

Extra offer

Description

INTRODUCTION & FEATURES

DESCRIPTION

XXX Adhesion Promoter seals substrates and increases adhesion of top coat materials to a wide variety of raw
plastics.

FEATURES

• Superior bonding properties

• Topcoat with most refinish products

• Excellent on olefin based plastics

• Easy to apply

• 3 convenient sizes

 

Instruction

APPLICATION: 1. Apply one light coat. 2. Allow 5 minutes flash time followed by one full wet coat. 3. Allow to flash 15 minutes but no longer than 30 minutes before topcoating. 4. Refinish with Color Coat, Bumper Coater, Marine Vinyl Coat, Marine Engine Paint, all base coats, clear coats, urethanes, acrylic enamels, alkyd enamels and acrylic lacquers.Note: If clogging develops, remove spray button with a twisting motion and clean with XXX Gun Cleaner or material compliant with VOC regulations in your area. Do not stick pin or other object into can. Gently replace spray button with top of can and spray button pointed away from you. Note: After each use, turn can upside down and spray several seconds to clear spray tip. Note: Adhesion improves with time. Do not rush to reinstall part. CLEAN UP: Use appropriate cleaning materials compliant with VOC regulations in your area. STORAGE: Plastic Adhesion Promoter should be stored in a cool, dry place with adequate ventilation away from heat, sparks and flames. The shelf life for Plastic Adhesion Promoter is 5 years when stored under normal conditions.

Viewed products

You have not viewed any product yet!
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

error: Content is protected !!